商店公告: 限時團購
購物車 (0)

你的購物車為空

Transmission mode of network monitoring engineering system installation
2021-11-02

1、 Network camera + power supply + network cable

During generic cabling, power lines and network cables shall be laid at the same time, and 220V AC power can also be taken nearby, so as to save power wires. Its advantages and disadvantages are not discussed here. Power each webcam. Another network cable transmits network data to the network hard disk video recorder NVR.

Transmission mode of network monitoring engineering system installation

2、 Webcam + Poe switch

In this way, one power cord is saved compared with the previous method. A network camera only needs one network cable as the medium for transmitting signals, and the power cord is no longer used. The network cable can use unshielded Cat 5 twisted pair, and there is no problem with the transmission distance of 100m.


Why does the mainstream use Poe switch as network monitoring engineering system now have the following advantages:
(1) Save wire, wiring time, wiring labor, and provide engineering construction efficiency.
(2) Without power supply, there will be no strong current, no risk of electric shock, reduce failure probability and reduce maintenance cost.
(3) Reduce the construction difficulty, simple and convenient, easy to start, and the project wiring is also more beautiful.


3、 Network camera + optical fiber + transceiver
As we said earlier, if the network cable transmission is within 100 meters, then if it exceeds 100 meters, we generally consider using optical fiber transmission. Optical fiber not only has a long transmission distance (can transmit 20 kilometers) but also has a stable effect.


We all know that when transmitting data through optical fiber, we convert the data signal into optical signal transmission, and then convert the optical signal into data signal. In this way, we use the cooperation of optical fiber transceiver to complete the work.


Optical fiber is cheap and has long transmission distance. It is widely used in monitoring engineering. However, the optical fiber needs to be welded, and the welding equipment is expensive, so generally, the welding needs to be carried out by a specially assigned person, which requires a certain cost and time. Optical fiber transceivers are divided into 100m and Gigabit, which can be selected according to the number of cameras.


4、 Camera + wireless bridge
In the implementation environment of specific monitoring engineering system, if the wiring is difficult and meets natural barriers or insurmountable obstacles, we can use wireless transmission mode, so we can use wireless bridge.


For example, wireless transmission is applicable to communities with hardened roads, elevators, built factories, open areas far away, fields and so on.


Wireless bridge can convert network signals into radio waves for point-to-point transmission. Use in pairs. Due to point-to-point directional transmission, long-distance wireless transmission can be realized, from hundreds of meters to tens of kilometers.


Construction precautions for using wireless bridge: there shall be no shielding or obstacles between the transmitting and receiving ends. In this way, the signal transmission will be stable.

上一篇:Causes of inaccessible network failure in monitoring project 下一篇:The development of small household appliance market is suspended, and abosin appliance looks forward to the future with three advantages

天天低價,暢選無憂 | 品類齊全,輕鬆購物

Email: sales@yaxins.com

© 2005-2024 亞信商城 版權所有,並保留所有權利。