1、 Installation position.

The installation position of pinhole camera needs to consider the monitoring range. Generally, the installation position first considers the places that are easy to be ignored. Such as: socket hole, bath mirror, smoke detector, bottom of lamp holder, ceiling panel, key hole, air-conditioning outlet, etc. If you are in the bedroom, you can also consider showerhead, clothes hanger, lamp holder, lamp holder, etc.

2、 Install the components.
The monitoring engineering pinhole camera is generally composed of lens, image sensor, analog / digital converter, image controller and so on. Before entering the installation procedure, be sure to check whether all components are complete, the size and model of expansion plug and screw, try whether the screw port of support screw and pinhole camera base is appropriate, whether the embedded pipeline interface is handled well, test whether the cable is unblocked, and enter the installation procedure after it is ready.

Monitoring engineering

3、 Debug the camera.

When installing the lens, be careful not to touch the lens and CCD by hand. After confirming that they are firmly fixed.

4、 Turn on the power and adjust the angle.
Turn on the power supply, connect the host or use the monitor and small TV on site to adjust the aperture and focal length. Adjust the camera range of the pinhole camera, find the angle, and determine whether the monitoring range can be reached.