1. The air conditioning outlet of the cabinet shall ensure that the door is open to avoid closing caused by equipment overheating.

2. Each network line in the cabinet shall be labeled to avoid unnecessary trouble in future maintenance.

3. The switch shall be fixed on the top of the cabinet and equipped with corresponding lines, which is conducive to the location of network lines.

4. Paste the asset number of each server, and print the asset number + barcode together through the label printer. Each server prints two identical ones, one in front of the equipment and the other on the side.

5. Generally, starting from power lines and network lines in different directions, each section is bound with a belt.

6. The back end of the network header between the connection server and both ends of the switch shall be marked with the same mark as the numbered network header, and the switch port number shall be consistent with the switch port number.

7. When connecting the cabinet, ensure that both ends of the power cord plug and the server power connector are provided with labels and tapes.

8. Wiring between cabinets is generally from the top of the cabinet.

9. If the cabinet is a switch with internal and external network, it shall be distinguished by two different color network lines as far as possible.

Cabinet wiring engineering is a technical work. The wiring is organized orderly, which not only brings great convenience to future maintenance work, but also facilitates us to check the interior of the cabinet. More importantly, it can make the equipment give full play to the highest performance.